Seco-Larm Enforcer Electric Deadbolt, Fail-Safe, 12/24 VDC (SD-997B-GBQ)

Description

Designed for hollow metal door frames, the Seco-Larm Enforcer Electric Deadbolt (Fail-Safe, 12/24 VDC) adds electric deadbolt control to a wooden or hollow metal door. The deadbolt works with Seco-Larm keypads and features shallow design for installation in most metal door jambs.
Fail-safe operation (unlocks if power is lost)
Stainless steel for strength and long life
Adjustable door lock delay timer (0, 2.5, 5, or 9 sec)
Magnetic switch determines door position for positive locking
The Electric Deadbolt is powered by a solenoid. If the door is not closed properly, the solenoid will attempt to lock, but then shuts off to avoid burning out. In the event of a complete power outage, the deadbolt’s fail-safe operation automatically unlocks to ensure access during an emergency. Additionally, the deadbolt’s control wire allows you to release the lock without cutting power.
Contents:
Lock Body
Strike Plate
Faceplate
6-Pin Connector
(2) Large Mounting Tabs
(2) Small Mounting Tabs
Mounting Screws
(4) Templates
NOTE: Not recommended for wooden door frames. However, door can be wood or metal.
Technical Details
Plastic Material:
Tefulon Polymonochlorotrifluoethylene.
Operation:
Fail-safe
Operation Voltage:
12VDC
Operating Lifetime:
1,000,000 operations
Current Draw:
Standby: 340mA at 12VDC / 180mA at 24VDC
Active: 900mA at 12VDC / 440mA at 24VDC
Over-Current Protection:
1.5A
Status Sensor:
SPDT, 500mA at 12VDC (NO/NC/COM)
Adjustable Delay Timer:
0/2.5/5/9 seconds
Lock Body Dimensions:
Faceplate: 7-7/8 x 1-5/16 inches (200 x 32 mm)
Cavity: 5-3/4 x 1-1/8 x 1-1/2 inches (145 x 28 x 38 mm)
Strike Plate Dimensions:
3-9/16 x 1 x 1-1/8 inches (90 x 25 x 33 mm)
Bolt:
Stainless steel, 5/8" diameter, 5/8" throw
Plug:
Special conic cavity stainless steel (thickness 1.5mm~1.8mm)
Weight:
1 pound, 13 ounces (0.8kg)
Manufacturer Part No:
SD-997B-GBQ
UPC:
676544015383