-40%
Hoppe Mortise Lock, Manual Single Point, 70mm Backset, 16mm Face Plate
Hoppe Mortise Lock, Manual Single Point, 70mm Backset, 16mm Face Plate
Hoppe Mortise Lock, Manual Single Point, 70mm Backset, 16mm Face Plate

Hoppe Mortise Lock, Manual Single Point, 70mm Backset, 16mm Face Plate

$ 68.63

Availability: 59 in stock
  • Item Width: 16 mm
  • Item must be returned within: 30 Days
  • Model: Single Point Lock
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Item Height: 275mm
  • Suitable For: Balcony/Terrace Door
  • Throw Length: 1 in
  • Color: Silver
  • Condition: New
  • Brand: Hoppe Industries
  • All returns accepted: Returns Accepted
  • Material: Stainless Steel
  • Item Weight: 24 oz
  • Restocking Fee: No
  • Type: Mortise Lock

    Description

    IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a  multipoint lock
    There are no interchangeable parts from this lock that can be used on other HOPPE locks.
    We are a Trusted National Distributor for HOPPE multipoint locks and hardware, with factory warranties
    Product Description:
    Hoppe manual single point mortise lock (SPL)
    Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.
    16mm Hoppe 70/92  Single Point Lock (SPL) 1" Deadbolt,  new style with locking handle
    Deadbolt Throw: 1 inch (25 mm)
    Face Plate Width: 5/8 inch (16 mm)
    Face Plate Length: 10-13/16 inches
    Faceplate Screw Holes: 10-1/8 inches
    Faceplate Material: Stainless Steel
    Backset: 2-3/4 inches (70 mm) - distance from edge of face plate to center of lock handle
    All Current Model Single Point Locks from HOPPE w/ Rotation Limiter
    (Lever is fixed and does not move after door is locked)
    11517463 - 35mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
    11517475
    - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
    11517487 - 45mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
    11517499
    - 45mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
    11517505
    - 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
    11517517 (this listing) - 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
    11517529 - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with square ends
    (Please
    contact office
    if needing one of the locks not currently linked to our site) Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release.  See linked article below.
    HOPPE Screws for Installation:
    8785695
    - Screw 1-3/8" ( 35mm ) 8mm Head - Stainless Steel
    8785687
    - Screws, 3/4"  (20mm )  8mm Head - Stainless Steel
    Helpful Articles
    How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn't Retract
    How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock